Engine Super-flush Decarboil RESURS

Engine Super-flush Decarboil RESURS
Save | Open
Engine Super-flush Decarboil RESURS

Engine Super-flush Decarboil RESURS

Packaging: 210 ml

Code: 9601

Description
Application

Get rid of oil burning!

The main causes of oil burning:

  • 50% — blocked oil scraper rings;
  • 30% — wear of engine parts;
  • 20% other.

Decarboil RESURS is struggling with the main cause of oil burning — it frees rings and oil drainage channels from deposits. Decarbonization through the oil system.

Professional Solution

There are a lot of flushes on the market and it is impossible to surprise with another product. However, they all have poor performance in the fight against heavy contamination. They are designed to keep the engine clean. But if problems have already appeared in the form of oil burn, only strong remedies can help. It is Decarboil.

What is “Decarboil”?

We did not find a product on the market that could be equal in strength to decarbonizer but used as an engine flush – high-performance cleaner and safe at the same time. Therefore, we are introducing a new term – «Decarboil». Decarboil is a new class of products, the main purpose of which is the decarbonization of oil scraper rings.

Reduces oil burning up to 3 times

For deep cleaning of heavily contaminated engines, it is recommended to apply RESURS Decarboil twice, changing the oil each time after a flush cycle.

Dissolves but not peels off the deposits

This is important when cleaning heavily contaminated engines. Peeled off deposits can lead to jamming of the oil system and oil starvation.

Releases oil scraper rings and channels

Struggles with the cause of oil burn. Contamination of the rings is inevitable – the engine burns fuel, and the combustion products settle on the rings.

Application

  1. Before use, withstand the composition at room temperature for 6 hours.

  2. Check the oil level and choose the correct dosage of the composition. A bottle of 100 ml is designed for 4-5 liters of oil. With a different amount of oil, the dosage is not more than 25 ml per 1 liter of oil.

  3. Warm up the engine to operating temperature, turn it off, open the oil filler.

  4. Pour the recommended dosage into old oil or new oil, flushing oil.

  5. For effective cleaning of highly contaminated engines, it is necessary to keep the engine work in the range of 1700-2300 rpm for 20-25 minutes.

  6. Switch off the engine and allow it to cool, for safely drain of used oil.

  7. After application in engines with a painted oil pan, it is necessary to verify the integrity of the paintwork, if necessary, remove the paint.

  8. Replace filter and oil.

Precautions

The composition may affect the paint of the oil pan during flushing. After applying Decarboil on engines with a painted carter, make sure the paint is intact and remove the paint yourself if necessary. If the pallet is painted on the outside, then control of the condition of the paint is mandatory. If you find swelling, cracking, partial delamination after disassembling the oil pan, be sure to remove the remaining paint. Removing the paint will allow the following flushing procedures to be performed without removing the pan.